» Home » Products »

HW61-160high temperature resistant paint

HW61-160high temperature resistant paint

High Temperature Resistant Paint
Introduction:
HW61-160 Salt, acid, alkali and high temperature resistant paint made of two different parts (A,B). This made from epoxy resin, modified resin, inorganic scales filling, activity agent, additives, etc. The product is a long lasting anticorrosion paint, as well as high adhesive strength, tight structure, high impact resistant properties, seawater resistant, pulverization of salt resistant, chemical air resistant, etc.

Technical indicators:
Physical Properties
Items Units Indicators Experimental Reference
Specific Gravity / Red, gray, others GB1729-79
Color / 1.4 GB1756-79
Viscosity(25degree) S 80-140 GB1751-88
Drying time(25degree) h Surface≤3, Hardl≥24 GB1728-88
Solid Content % ≥75 GB1725-79
Adhesion Class 1 GB1720-79
Impact Strength Kg·cm 50 GB1732-79
Flexibility mm 1 GB1731-79
Wearability(1kg, 500turns weightlessness) g <0.05 GB1768-79

Chemical Resistance Properties
Items Units Indicators Experimental Reference
H2SO4 (25%,250) day 60,No foam, No scale, slight fading GB1763-79
HNO3 (12%,250) day 60,No foam, No scale, slight fading GB1763-79
HCL(10%,250) day 60,No foam, No scale, slight fading GB1763-79
NaOH(25%,250) day 60,No foam, No scale, slight fading GB1763-79
SALT(5%,250) day 180No foam, No scale, slight fading GB1763-79
Petrol (250) day 18,No foam, No scale, slight fading GB1734-79
Pulverization of salt hour 1000,No foam, No scale, slight fading GB1771-79
Comprehensive Assessment / Good GB1766-79

Application: It is used on the surface of road tube, oil tank, as well as steel and concrete.
Specifications:
Color: red, black (primer), gray, green
Specific Gravity: 1.4
Dosage: 0.3kg/m2
The Thickness: 125um (wet)
The Thickness: 80um (dry)
Ratio: 100:10 (A:B)
Application Time: 4hours, 25degree
Application Methods: bush, roll, spray
Diluents: special <8%
Surface Dry: 1hour, 25degree
Hard Dry: 24hours, 25degree
Solidify: 7 days
The Interval between two washing: 24 hours (shortest time), 100c
7days (longest time), 10degree
8 hours (shortest time), 25degree
3days (longest time), 25degree
6 hours (shortest time), 35degree
4days (longest time), 35degree

Surface Finish: The surface of steel should meet the Swedish 2.5 or St3 standard
Duration period: 12 months
Flash Point: 20degree

Back Back