- High Temperature Paint
- High temperature resistant paint HT-1
- High Temperature Resistant Paint
- Chlorinated Polyethylene Paint
- Chlorinated Polyethylene Paint
- Chloride Enamel
- Chlorinated Rubber Paint
- Chlorinated Rubber Paint
- Anticorrosion sulfonated Polyethylene Paint
- Chlorinated rubber Paint
- Chlorinated rubber Coating
- Anticorrosion Paint
- Anticorrosion Paint YA-1
- Anticorrosion Paint YA-2
- Polyurethane Paint
- Anticorrosion Polyurethane Primer
- Polyurethane Primer
- Acrylic Paint
- Acrylic Paint
- Latex Paint
- Latex paint XB-1
- Latex paint XB-2
Anticorrosion Paint
Introduction:
Anticorrosion paint (primer) is made of two different parts (A,B). This is made from ethylene modified resin, enhancers, dye, stabilizer, solvent, etc. FVC-A anticorrosion painthas excellent anticorrosion, as well as UV resistant, anti aging, heat resistant, acid resistant, and alkali resistant.
Application:
Anticorrosion paint is used on the exterior wall, ceiling and steel, etc.
Specifications:
Color: red
Dosage: 0.2-0.22 kg/m2
Ratio: 100:6(A,B)
Application Methods: bush, roll
Solvent: special
Surface dry: 30minutes (23degree±2degree)
Hard dry: 24hours (23degree±2degree)
The Interval between two washing: 2hours (shortest time) (23degree±2degree)
24hours (shortest time) (23degree±2degree)
Surface Finish: the surface of concrete and wall should be cleaned and flatted before paint
Duration period: 6 months
Experiment:
| Intermedia | Time | Result |
| 10% H2SO4 | 120h | No change |
| 10% NaOH | 120h | No change |
| 5% NaCL | 120h | No change |
- Acrylic PaintWe are a China spray paint maker. Our acrylic paint is widely used in petrochemical, electrical, mechanical and metallurgy industry. This product ...
- Chlorinated rubber CoatingChlorinated rubber coating is made from chlorinated rubber, plasticizer, solvent and additives, etc. The coating is hard and with water resistant and chemical resistant.