- High Temperature Paint
- High temperature resistant paint HT-1
- High Temperature Resistant Paint
- Chlorinated Polyethylene Paint
- Chlorinated Polyethylene Paint
- Chloride Enamel
- Chlorinated Rubber Paint
- Chlorinated Rubber Paint
- Anticorrosion sulfonated Polyethylene Paint
- Chlorinated rubber Paint
- Chlorinated rubber Coating
- Anticorrosion Paint
- Anticorrosion Paint YA-1
- Anticorrosion Paint YA-2
- Polyurethane Paint
- Anticorrosion Polyurethane Primer
- Polyurethane Primer
- Acrylic Paint
- Acrylic Paint
- Latex Paint
- Latex paint XB-1
- Latex paint XB-2
Anticorrosion Paint
Introduction
Anticorrosion paint is made of two different parts (A,B). This is made from ethylene modified resin, enhancers, dye, stabilizer, solvent, etc. The product has excellent anticorrosion, as well as UV resistant, anti aging, heat resistant, acid resistant, and alkali resistant.
Application
FVC-A Anticorrosion paint is used on the exterior wall, ceiling and steel, etc.
Specifications:
Color: red
Dosage: 0.2-0.22 kg/m2
Ratio: 100:6(A,B)
Application Methods: bush, roll
Solvent: special
Surface dry: 30minutes (23degree±2degree)
Hard dry: 24hours (23degree±2degree)
The Interval between two washing: 2hours (shortest time) (23degree±2degree)
24hours (shortest time) (23degree±2degree)
Surface Finish: The surface of concrete and wall should be cleaned and flatted before paint
Duration period: 6 months
Experiment:
| Intermedia | Time | Result |
| 10% H2SO4 | 120h | No change |
| 10% NaOH | 120h | No change |
| 5% NaCL | 120h | No change |
- Zinc Primer Inorganic Zinc Primer made of two different types (A, B).The product made from ethyl silicate, zinc powder, filling, additive and solvent. The product has excellent ...
- Chlorinated rubber CoatingChlorinated rubber coating is made from chlorinated rubber, plasticizer, solvent and additives, etc. The coating is hard and with water resistant and chemical resistant.