- High Temperature Paint
- High temperature resistant paint HT-1
- High Temperature Resistant Paint
- Chlorinated Polyethylene Paint
- Chlorinated Polyethylene Paint
- Chloride Enamel
- Chlorinated Rubber Paint
- Chlorinated Rubber Paint
- Anticorrosion sulfonated Polyethylene Paint
- Chlorinated rubber Paint
- Chlorinated rubber Coating
- Anticorrosion Paint
- Anticorrosion Paint YA-1
- Anticorrosion Paint YA-2
- Polyurethane Paint
- Anticorrosion Polyurethane Primer
- Polyurethane Primer
- Acrylic Paint
- Acrylic Paint
- Latex Paint
- Latex paint XB-1
- Latex paint XB-2
Epoxy Paint
Introduction of Anticorrosion Epoxy Iron Oxide Red Paint:
Anticorrosion epoxy iron oxide red paint is made of two different types (A, B). This is made from epoxy resin, Iron Oxide Red, dye, filling, hardener, etc. This epoxy paint has excellent anticorrosion properties, as well as high temperature resistant, water resistant, acid resistant, alkali resistant, salt resistant, oil resistant and chemical air resistant. This product is mainly for chemical equipment use.
Specifications:
Color: Iron Oxide Red
Specific Gravity: 1.27
Dosage: 0.22kg/m2 (both)
The Thickness: 60um (wet)
The Thickness: 30um (dry)
Ratio: 100:30 (A:B)
Application Time: 8hours, 25degree
Application Methods: bush, roll, spray
Solvent: Special, <5%
Surface Dry: 4hours, 25degree
Hard Dry: 24hours, 25degree
The Interval between two washing:
8 hours (shortest time), 25degree
2days (longest time), 25degree
Surface Finish: The surface of steel should meet the Swedish Sa2.5 standard
Duration period: 12 months
Flash Point: 23degree
- Polyurethane PrimerWe are a China exterior paint supplier. Polyurethane primer is made from resin, isocyanate prepolymer, dye, filling, solvent and additive, etc, which make of two different types (A, B). The product has ...
- Anticorrosion Paint YA-2Anticorrosion paint is made of two different parts (A,B). This is made from ethylene modified resin, enhancers, dye, stabilizer, solvent, etc. The product has excellent anticorrosion, as well as ...