Floor Paint,Epoxy Paint,Chlorinated Rubber Paint,China Floor Paint Manufacturer

Home » Products » Epoxy Paint » Floor paint

Floor paint

Introduction of Floor paint:
Floor paint is made from epoxy resin, modified resin, activity agent, additives, etc. The product is a long lasting anticorrosion paint, as well as high adhesive strength, tight structure, high impact resistant properties, seawater resistant, pulverization of salt resistant, chemical air resistant, etc. The floor paint can make the floor good looking and long time lasting; it can be used in workplaces such as hotel and station.

Floor paint:Technical indicators:

No.	Item	Experimental Reference	PF-1
1	Gloss	GB1743-79	88%
2	Adhesion	GB1720-79	1
3	Hardness	GB1730-79	0.76
4	Impact Strength	GB1732-79	50cm
5	Flexibility	GB1731-79	1mm
6	Wearability	GB1768-79	9.7mg
7	Impact resistance	B-30A Tester,30kg/m	Good
8	Pressure experiments	GT-200 Tester, 2500N/cm²	Good
9	Pull test	GT-200 tester	290N/cm²
10	Pressure	Forklift press for 50 times	No change
11	Water resister	GB1733-79, 7days	No change
12	Pulverization of salt	GB1771-79,1000h	No change
13	brush	TLXY Tester, 2000times	No change
14	45# petrol	GB1734-79, 30days	No change
15	200#Petrol	GB1734-79,30days	No change
16	diesel oil	GB1734-79,30days	No change
17	Temperature	1050C to 50C, for 3cycles during 16h	No change
18	H2SO4	GB1763-79, 20% H2SO4, 20days	No change
19	NaOH	GB1763-79, 20%, 30days	No change

Specifications:
Color: many kinds
Specific Gravity: 1.32
Dosage: 0.35kg/m²
The Thickness: 180um (wet)
The Thickness: 60um (dry)
Ratio: 3:1 (A:B)
Application Time: 8hours, 25degree
Application Methods: bush, roll, spray
Diluents: Special
Surface Dry: 4hours, 23degree (±2degree)
Hard Dry: 24hours, 23degree (±2degree)
Solidify: 7days
The Interval between two washing:
48hours (shortest time), 15degree-25degree
30days (longest time), 15degree-25degree24hours (shortest time), 25degree-30degree
20days (longest time), 25degree-30degree
Duration period: 6months
Flash Point: 24degree

Formula 1: PF-1 Floor Paint

No.	Items	Specifications	Thickness(um)
1	Closed layer	Lacquer
2	Bottom layer	Lacquer +1# filling	600-2400
3	Middle layer	Lacquer +2# filling	300-500
4	Surface layer	Glossy coating	100
Total thickness	1000-3000um

Formula 2:PF-2 Floor Paint

No.	Items	Specifications	Thickness(um)
1	Closed layer	Lacquer
2	Bottom layer	Lacquer +1# filling	600-2400
3	Middle layer	Lacquer +2# filling	300-500
4	Surface layer	Glossy coating	100
Total thickness	1000-3000um

Notice:
You should prepare the following material before you paint.
a. H52-83 floor paint
b. H52-83 lacquer
c. H52-83 solvent
d. 1# filling, 2# filling
Ratio:
H52-82 lacquer (It made of two different parts): 3:2(A:B)
H52-82 paint (It made of two different parts): 3:1(A:B)

Formula 1:

	PF-3 floor paint	PF-3 lacquer	1# filling	2# filling	PF-3 solvent
Closed layer		100			70-100
Bottom layer		100	380		10
Middle layer	100			100	5-10
Surface layer	100				Appropriate

Formula 2:

	PF-4 floor paint	PF-4 lacquer	1# filling	2# filling	PF-4 solvent
Closed layer		100			70-100
Bottom layer		100	380		10
Middle layer		100		200	5-10
Surface layer	100				Appropriate

Floor:
a. The floor should meet the GB50209-95 Standard
b. the concrete floor should paint 3 weeks (summer) after finished, in winter need 6 weeks.
c. before painting the floor must flatted, clean and dry.
d. bottom layer is not allowed, unless the closed layer have painted for 30 minutes.
e. the pain can be painted 20 minutes after mixed, the dry time will last 24hours(23±2degree).
f. the pain can be painted 20 minutes after mixed, the dry time will last 24hours(23±2degree).
g. the pain can be painted 20 minutes after mixed, the drying time will last 7 days(23±2degree).
h. Painting is not allowed when temperature below 10 degree and humidity more than 85%.
i. Other substance is not allowed to mix into the paint, and the paint should be use up to 4 hours.
j. Dangerous material, please keep it safe.
k. Please read the introduction carefully before use.

Other Products

1. Anticorrosion Polyurethane PrimerAnticorrosion polyurethane primer is made from resin, iIsocyanate prepolymer, dye, filling, hardener, solvent and additive, etc, which made of two different types (A, B). The product has excellent ...
1. Chlorinated rubber CoatingChlorinated rubber coating is made from chlorinated rubber, plasticizer, solvent and additives, etc. The coating is hard and with water resistant and chemical resistant.